 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane model baystat 239
I'm replacing the 239 with Hunter Model 44860. I currently have 2 wires coming to the 239 thermostat, 1 wire has a white, red &green (green not used). 2nd wire has a red,yellow,blue & green.The green goes to G;Red goes to O; white goes to X2 & W.
The yellow goes 2 Y; white goes to T; red goes to R. Blue goes to B;U & F not used. The hunter has Rc/R,C,Y1,Y2,W2,E,O,B,G & l Hopefully you can tell me the correction connections. The wires coming to the thermostat is about 20 years old. thanks for your help Ron ([email protected]) |
||||
Check out some similar questions!
Please help with wiring!! Which color where?? I am replacing a trane 239 thermostat with a hunter 44860 the trane thermostat is wired as follows: G green O orange Y yellow T brown R red W white which is also jumped to X2 B blue
I am replacing a Trane Baystat 239 thermostat with a Honeywell TH3210D1004 thermostat. The Trane thermostat is wired is follows: Terminal Color of Wire X2 Black O Orange G Green Y Yellow T Tan R ...
Whoever can help me with this issue I would greatly appreciate it. I have a Trane Weathertron thermostat and I want to replace it with a Honeywell 7600d programmable thermostat. I have an issue. When I installed the thermostat is only pumped out cold air while in heat mode. I have a heat pump...
Hi all, I have scoured the internet and have yet to find a definitive answer to my question I'm about to ask. I have a Trane heatpump (XE800, model TWB718A100B0) that was made in 11/1988. It's got backup electric heat and that's it. Works fine since I moved into my condo and I have recently...
I have a trane weathertron with a heat pump. I would like to install my new hunter 44860 touch screen thermostat. The wiring is as follows: Trane Green=G Orange=O Black=x2 Yellow=y Brown=T Red=R
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
