 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to hook up 1F80-261
I have a forced air, central air-conditioning and heatng system : Furnace: Goodman GMP075; Thermostat: White-Rodgers 1F80-261.
When I select Heat/Cool "Off " and set Fan on "On" in the thermostat, Air conditioner compressor fan located outside of the building is running but furnace blower motor is not running. I need help: I want only furnace motor run to circulate air inside the building when I set "Heat/Cool" to "Off" position and set Fan to "On" position in the thermostat. Is my thermostat wiring wrong? Or Is there any method to run the furnace blower motor only when heat/cool is set "off"? I have a copy of wiring diagram for the thermostat. I would appreciate any help. Thanks. Sungm |
||||
Check out some similar questions!
White-Rodgers 1F80-51 wiring
[ 3 Answers ]
I have a Rheem heat pump unit. A White-Rodgers 1F80-51 thermostat was connected up with the A/C cooling cycle working, but for heat, only the strip elements in the air handler come on. The thermostat is wired; white to W, red to RH w/jumper to RC, blue to B, nothing to O, yellow to Y, green to...
Hook Up of White Rodgers 1F80-261 Thermostat
[ 3 Answers ]
I have a gas furnace with only 2 wires running to a mechanical thermostat. When heat is off, Voltage is about 25 volts AC mesured at thermostat. When heat is on, voltage measured at thermostat is 0 volts AC. Need to know if I can replace old mechanical thermostat with White Rodgers 1F80-261...
White-Rodgers 1F80-54 manual
[ 2 Answers ]
How do I get a manual for the White-Rodgers 1F80-54 manual?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
