 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Refrigearator evap coil is only frizing on 1/2 of coils, can you tell me why?
OK here is a qestion I have,if you replace a older R22 evaporator coil with a newer R410A Coil will you have to replace the out side condencer?if so can you just use 410a in a r22 system? # 2 question is: can you convert a stright cool air conditioner to a heat pmp by putting a reversing vave in...
Hi The evaporator coil needs replacing as my AC is not working. The problem I hve is that I have ordered one over the phone and now I am unsure that I have given the right model no and serial no. The numbers I gave are: Model # CLJ 36 1C Serial # 0509098270 I havejust come across an invoice...
Most systems show the evaporator coil after the blower, however, some air handlers show a configuration where it is before the blower. I don't have enough room above my vertical furnace to put an A coil. Would a horizontal coil between the filter and blower work?
Hello - after reading earlier posts, I think I may need to clean our evaporator coil. Is that something I can do myself and how would I do that? Thanks, Sally
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
