 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ro 41 relay/overload
My westing house frg went out last night and I got this ro-41 relay and teck told me to cut 2 wires and I doint remember witch to cut to put in the start capacitor if it was the white and black---- or the red and black. Red wire is the run but I doint see cutting the white wire that's the common, please reply asap as the frig been off sent 11 pm last night and it now 11 am Neeko
|
||||
Check out some similar questions!
What is the mean of over load in electricity?
Where is the fuel pump relay located on a 93 honda civic cx 1.5
I have an Inglis fridge and I have to replace the original with a universal relay overload. The new part does not color code with the wires on the fridge?
We are renovating an old house and have converted it to 3 apartments. We had a 200 amp panel in the basement and a sub panel on the first floor. WE have been upgrading the wiring (most of which was knob and tube) and we have added new wiring to the sub panel box. The problem is that half of the...
First off I have 3 heating zones in my home, gas fired boiler and hot water baseboard. My issue is two fold. 1st issue... thermostats work fine on both floors and with that in mind I keep the temp set at 72 on the first floor and for some reason this heats the baseboards on the second floor as...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
