Ask Experts Questions for FREE Help !
Ask
    JayMac33's Avatar
    JayMac33 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 27, 2010, 06:10 PM
    Can you use R-22 from other Units
    Can you take R-22 out of the old compresser that is not working and put it in the new compresser? Or does this mess up the compresser when using recycaled R-22?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Aug 27, 2010, 06:22 PM

    If you had a compressor failure, the refrigerant reclaimed from the system should Definitely not be reused ever any where. Refrigerant can be reclaimed and reused if the system it was reclaimed from was in perfect working condition. Also, if compressor failed, make sure dryer filter is replaced at same time as compressor. Then start from scratch with vacuum and new refrigerent.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

C Units? [ 1 Answers ]

Our home has an open floor plan, we have two AC units. I have been leaving the upstairs unit turned off because normally there is only my wife and I here. I noticed that when the upper unit is on the lower unit does not run as long so I decided to leave both units on. Currently I have the upper...

A/c units [ 1 Answers ]

In the house a/c unit, will too much freon cause the drain to clog?

2 ac units or 1? [ 3 Answers ]

We are buying a house in Melbourne, FL with their optional energy efficiency package. Originally, they said there were going to be two ac units, now they came back and said the AC company changed to a new style handler and the second unit is no longer needed. The house is 2600 sq ft two story...

Can someone tell me these units? [ 1 Answers ]

Hi, does anyone know the units for: Velocity Acceleration Force Work And Power? Thank you.

Using units [ 5 Answers ]

turning kg into joules do you use the units kilograms when working out an equation or would you convert them into g before using the equation

View more questions Search