Ask Experts Questions for FREE Help !
Ask
    fraidy's Avatar
    fraidy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2010, 11:35 AM
    Where can I get a 4 1/2 inch brass sewer replacement cover?
    No one seems to carry a replacement cover in this size. Any suggestions?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 25, 2010, 04:08 PM
    How old is the fitting? Most sewer clean outs are 4". Here's your selection. (see image).
    Let me know if you find one. Good luck Tom
    Attached Images
     
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Aug 25, 2010, 04:38 PM

    Hi fraidy

    Your best bet will be to go to a local PLUMBING SUPPLY STORE and talk to the guys at the counter... sure they can find one... :)

    Mark
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #4

    Aug 25, 2010, 06:49 PM

    Ferguson Enterprises or Hirsh Pipe and Supply. Google them for contact info. Ferguson is all over US while Hirsh will ship it to you same day.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #5

    Aug 27, 2010, 08:42 AM
    Good lead. I happen to know this supplier since about 2004. Indeed, they have highly competitive prices - at least in So.California. We have an open account with them and restock our copper supplies exclusively through them...
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #6

    Aug 27, 2010, 12:54 PM

    Yep Milo,

    GPS is close to you and have purcahsed some valves and fitting from them with a reasoable price.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer cleanout cover damaged [ 13 Answers ]

I asked somebody to mow my lawn. I heard some noise but didn't pay attention to it. After a few minutes the guy left without asking for payment. I walked out and found out the sewer cleanout cover was broken. Now he doesn't answer my call. I'm worrying about how to fix it! I know water can't be...

Looking for basement backlow sewer cover [ 1 Answers ]

I just installed engineered flooring on my basement, however by code needed to maintain access to our backflow sewer line. The access point is a circle about 5 ¾ inch in diameter located in the middle of the floor. The actual drain is properly covered; however the cylinder extends upward about 8-10...

Cover for home sewer vent [ 1 Answers ]

Squirrels have been storing pecans in our sewer vent and we have had major plumbing problems. The vents have been cleaned out, but we need to know how to keep the critters out. I understand we could put screen over the top, but wouldn't they just eat through it. What would you recommend we use?...

Brass Closet Flange for Metal Sewer Pipe [ 3 Answers ]

I am installing a new toilet and found that the existing closet flange was broken. I don't recall how the closet flange was installed and I'm not sure how to put in the new one. I have a 3" metal sewer pipe. The rim of the sewer pipe measures 5" and the actual opening measures 3". My plumbing...

Sewer trap cover [ 3 Answers ]

Hello all, We have a terra cotta pipe in our front yard leading down to the sewer lateral line (is this called the "sewer trap"?). This pipe has, until recently, had a round terra cotta cover on it... eight inches in diameter and 3/4" thick in this case. Clay being what it is, this cover has...

View more questions Search