 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Brivis error code 30 fan limp
My bivis mps 20e heater shows error code 30 which won't reset. The main controller says FAN LIMP. We replaced the fan speed sensor under the fan but to no avail. What is the problem, is it user fixable, if I need a brivis service will they bring the right parts? We are in a remote area. Can you advise? Thanks Martin.
|
||||
|
||||
|
Hi Martin. I have exactly the same problem! Did you find a solution? Where did you buy the spare part from (fan speed sensor)? Was it easy to replace? I really don't want to pay $220 just to get Brivis out (plus parts and labour!! ). You can email me [email protected]
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Blower fan on with no heat and no error code
[ 7 Answers ]
Hello, My low efficiency Heil furnace will intermittently fail to turn on the main burners. The exhaust vent fan starts, the glow plug lights, piolet light ignights, the main blower motor turns on and remains on, but the main gas burner never fires. It seems like the gas never turns on and the...
Brivis networker control fault code #35
[ 1 Answers ]
Brivis central heater network control is showing fault code #35 how can I reset this? Or is something broken?
Error code 39
[ 5 Answers ]
Hi I have a dell inspiron 6000. Its about 2 years old. Windows xp. Recently the audio has disappeared. It has a yellow exclamation mark beside it in the control panel and says code error 39- missing or corrupted. I tried a couple of registry cleaners but it made no difference. I'm afraid to...
View more questions Search
|
