Check out some similar questions!
Minimum Circuit Amps for 2 ton air handler with 5kw heat strip
[ 2 Answers ]
Hi all. I currently have a 30Amp breaker on 10 gauge wire for the air handler and heat strip. This was a new install and the local inspector seems to think that 30amps is not enough. I took a picture of the specs and uploaded below. What breaker/wire is needed to be in compliance? Any help is...
Heat strip ina air handler
[ 2 Answers ]
Where does the heat strip go in a air handler unit is. It in with the blower system
Gas Furnace Turns On But No Heat/Air Flow
[ 1 Answers ]
The furnace ran fine in the morning but some time in the afternoon it stopped. Details: Not sure of brand (didn't see a name when I went into attic). Supposed to be about 10 years old. Does not have a pilot but an "ignition system". When I set the thermostat and turn to "on" position, you can... View more questions Search
Add your answer here.
|