 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Reinstalling gas fireplace with fan-red connector came off does not turn on.. help
I had to remove our gas fireplace for some renovations and now I have reinstalled the fireplace the flame come on but not the fan. I notice the little red connector had come off and he put it back on without the red connector but the fan is not working... any suggestions would greatly be appreciated. Thank you Franni
|
||||
Check out some similar questions!
My gas fireplace fan comes on for a minute or so and then shuts off can you help?
I have a gas fireplace with a dimmer switch on the wall that controls the fan. The wife went to use it the other day and said when she went to adjust the fan a spark came out of the switch. I look it over and found the switch and somehow got loose and shorted to the side of the box. However it did...
How do I repair a gas fireplace fan that becomes warped and therefore noisy during operation after reaching very warm temperatures?
My gas fireplace turns on by a standard light switch. It responds immediately when it's turned on. When I turn the switch off, it takes 10-30 minutes for the flame to turn off. I checked all the wire connections and everything seems to be fine. Is the valve just sticking? Do I have to replace...
We have had our propane gas fireplace for 4 years now, and it has always worked beautifully until now. We still have flames, but the fan (which we usually leave turned off and only use once in a while) isn't working. We turned the fan on tonight and nothing. Of course, we can't lay our hands on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
