Carrier 58sta/stx damper won't switch over

Check out some similar questions!

58sta carrier --- Thermidistat control is blanked out. The system is dead. [ 0 Answers ]

I have a dead Thermidistat. No power, no lights. Not battery power. It seems it not geeting power from control cct from 58STA Carrier system. I am not sure where to begin. Please help... Thanks,

Carrier furnace 58sta flame sensor/no ignition [ 8 Answers ]

I have a Carrier 58STA135 furnace. When asked for heat the little blower fan comes on for a minute then the gas turns on(can hear n smell it) but no pilot ignition. Tries for 3 times (per the code description) and goes into ignition lockout. Code 14 and 34. I'm not electrically proficient so are...

Carrier 58STA/STX -- No Heat [ 8 Answers ]

Hi all, I have this Carrier HVAC but its not blowing any heat at all. Cooling is fine. The burner and fan start as I can hear the fan and flame starts but it cuts off. I turned off the circuit breaker to reset it and try to re-start. It did re-start, blow air, starts the furnace but it...

Carrier Heater won't shut off! Blows only cool air. Heat won't work! [ 1 Answers ]

Does anyone know what I can do? My carrier heater is only 2 years old. As of yesterday the heater unit wouldn't shut off and when I turn the heat up it just keeps blowing cool air. I heard I can trip a breaker switch. Is that the electrical switch in the garage or on the heater itself? Please let...

Carrier Furnace model 58STA fan only shuts off for 10 second intervals [ 1 Answers ]

My 3 year old Carrier Furnace, model 58STA had a, seemingly, routine cleaning and check recently. Prior to the service call it was running fine. I noticed that after the cleaning the burner would fire up then the blower would come on. The burner stays on for about 5 minutes then shuts down. ...

View more questions Search

Check out some similar questions!

Add your answer here.