 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
58sta carrier --- Thermidistat control is blanked out. The system is dead.
I have a dead Thermidistat. No power, no lights. Not battery power. It seems it not geeting power from control cct from 58STA Carrier system. I am not sure where to begin. Please help... Thanks,
|
||||
Check out some similar questions!
I have a Carrier 58STA135 furnace. When asked for heat the little blower fan comes on for a minute then the gas turns on(can hear n smell it) but no pilot ignition. Tries for 3 times (per the code description) and goes into ignition lockout. Code 14 and 34. I'm not electrically proficient so are...
I installed a godman gas two stage multi speed furnace and kept a tempstar single speed heat pump. Can I also keep the carrier thermidistat tstat also? I am confused on how to wire the tstat and furnace. I actually took out a boiler that worked with the heat pump so I am not sure where to start or...
What are the terminals S1 and S2 for? I want to install a zwave thermostat, but these t 2 wires don't show anywhere. As a side, is there a wireless thermidistat contol on the market?
Hi all, I have this Carrier HVAC but its not blowing any heat at all. Cooling is fine. The burner and fan start as I can hear the fan and flame starts but it cuts off. I turned off the circuit breaker to reset it and try to re-start. It did re-start, blow air, starts the furnace but it...
The fan control on my Carrier Thermidistat does not turn the blower fan on when the Fan button is set to On. In Auto, the fan will not operate the fan on either a heating or cooling cycle with my heat pump. The fan DOES work when the furnace operates in emergency mode which is being controlled by...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
