Ask Experts Questions for FREE Help !
Ask
    rsimplicio's Avatar
    rsimplicio Posts: 20, Reputation: 3
    New Member
     
    #1

    Dec 21, 2006, 12:41 AM
    There definitely would not be enough support for a one-piece enclosure if you have a square foot of opening beneath the drain area. Can't you dry-fit the piping and enclosure? You should be able to measure out from the surrounding walls to the center of the drain in the enclosure. There should be engineering/spec drawings giving dimensions and cut-outs available for your enclosure from the manufacturer/retailer.
    rsimplicio's Avatar
    rsimplicio Posts: 20, Reputation: 3
    New Member
     
    #2

    Dec 21, 2006, 10:59 AM
    I'm not sure about the supported along the edge part, and I'm having trouble finding any instructions on installing them, so I can't confirm that. It may well be true though since they are made from fiberglass.

    Have you purchased the enclosure yet? I still think your best bet would be to dry-fit it, then you can transfer where the drain opening is to the flooring or a piece of plywood or cardboard if there's nothing left to mark on the floor. You'll also need to check out the instructions that come with the enclosure, as you'll probably need to attach the drain to the enclosure before you install it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moving shower drain in basement floor? [ 2 Answers ]

What is the best way to move a shower drain in the basement floor. I am doing a remodel in my basement and the shower drain will have to be moved. I was wondering what the best way to remove the concrete is, and then the best way to make the repair. Thank you Thanks for the help. So should I...

Installing Basement Shower Drain with Washing Machine Drain [ 5 Answers ]

Hi folks: I would like to install a shower that drains into the same drain as my washing machine. Right now the washing machine drain, 1-1/2" ABS, comes in horizontally about 12" above the concrete floor into a 1-1/2" Tee on a vertical pipe. From this Tee, the vent goes straight up to the...

Moving a basement shower drain [ 3 Answers ]

Hello, I am renovating my basement bathroom, and would like to move the shower drain over by about 50". The current drain comes out of the concrete floor. It is a 2-1/4"diameter drain pipe that is surrounded by a 5" diameter pipe with concrete around the outer pipe. I am planning to install a...

Moving drain in custom shower, whirlpool tub and toilet on concrete slab [ 4 Answers ]

I am finalizing plans to update a master bathroom that sits on a concrete slab. My question is: can shower, whirlpool tub and toilet drain holes be moved without drilling into the concrete? If so, what is the maximum amount that the holes can be repositioned without having to drill? I would...

Shower drain in basement [ 8 Answers ]

I bought a one-piece Lasco shower enclosure as part of finishing the basement bathroom. The PVC drain is plumbed in and sticks up about 6" out of the floor. There is also a large diameter black corrugated "hose" around it (I guess for when they poured the concrete floor around it.) I can cut this...


View more questions Search