Ask Experts Questions for FREE Help !
Ask
    cjignatius's Avatar
    cjignatius Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 13, 2010, 01:32 PM
    kenmore HE 2 plus
    Why would water pour out of the kenmore HE 2 plus if it was not turned on, and the values to the machine were turned off?
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #2

    Aug 13, 2010, 01:35 PM

    Ok, listen, the front load washers are a more sophisticated type of equipment than a normal top loader. Your reason could be a couple of things
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #3

    Aug 13, 2010, 01:37 PM

    I can help you through this if you think you can diy
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #4

    Aug 13, 2010, 01:39 PM

    Rep me if you can lol. Anyway, what you need to do is to drain the washer completely, turn off the water lines, disconnect them.
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #5

    Aug 13, 2010, 01:40 PM

    Then turn the washer onto a couch or anything with an incline, DO NOT turn on side. It could **** up the machine. Look under and check every hose. I honestly would bet money on it that a hose is leaking. Draining the water.
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #6

    Aug 13, 2010, 01:41 PM
    After you do all of this and reconnect everything, let me know if I solved your problem.
    chaseroo's Avatar
    chaseroo Posts: 10, Reputation: 1
    New Member
     
    #7

    Aug 13, 2010, 01:42 PM

    GOOD LUCK BUDDY, it shouldn't be so hard :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore 70 [ 0 Answers ]

HELP... Kenmore 70series Model 110.82873120 I can only get it to come on when the knob is turned to the *s. It's the last part of the rince & spin Cycle. Replace Knob & Timer Mechonizim... HELP

Kenmore refrigerator ice makerwhy does my kenmore icemaker won't get any water? [ 0 Answers ]

The water line got connected, and I made sure that it works, but it will not go pass the water line, is there a special wireing I need to know,, there are three little motors, but only two of them have a connection, (power supply),

Kenmore d/w still trying [ 0 Answers ]

To figure why red light flashing! I took three screws from bottom in order to pull out the filter and check for goop.But I cannot figure how to take the filter out:either glued or the "arm" at noon position in the way.Any suggestions my friend? Anyway:Sears never again:mad:.Back to reading all...

Kenmore 90 [ 0 Answers ]

My washer will not drain


View more questions Search