 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What are the mesaurements needed to roughin a wall for a new tub
I am remodeling a basement bathroom, removing a wall so I can put a tub in and take out a stand up shower, what are the mesurements for the tub rough-in, i.e. the 2 by 4 stablizers are to be how high up
|
||||
Check out some similar questions!
I am converting an attached garage into a formal dining area. The garage is on the other side of the end wall of the house where the living room and kitchen are. The garage was 2 steps down from the kitchen. I have replaced the garage door with 2 windows and raised the floor 9" using 2x8s on 16"...
I am removing a fluorescent light fixture and the wiring connection is made inside the fixture and not in a junction box. The wire just comes through the wall into the fixture. Can I just put wire nuts on the wires and push them back into the hole in the wall? Thanks
I have just had plumbing done to add a new 1/2 bath (on a slab). I never thought about where the drain for the toilet was located. I just told the plumber where I wanted the toilet and vanity located against the existing wall . Today they installed the toilet and the tank sits 7" from the wall! ...
We recently had to do some remodeling in my living room to accommodate an electrical switch, overhead light, and 2 wall sconses. This included a contractor making several holes in my ceiling and walls and repairing the holes with drywall. The drywall looks great, however when he came back to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
