 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
any reason why i cant make some 12in X 8 in duct work from alumiun
I need to add some return line to my 20 X 8... I like to add about 12 X 8... can I use alumiun..
|
||||
|
|
|
||||
|
Sure you can but remember normal gauge aluminum is usually soft so it is a little more difficult to support and work with. On the other hand it is lighter in weight. |
||||
|
|
|
||||
 Originally Posted by hvac1000
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
How do you run duct work in a 2 story house when the systems in the attic
The elbo section of duct work in basement fell down from the duct it was connected to and previous owner had it connected with duct tape. New application of duct tape did not hold it for long. So what is the safest way to connect these two ducts or at least prop it up to the ceiling so it cannot...
I'm installing a 2 ton goodman heat pump the house is 1000 sq feet,the duct work is flexible, 25 ft. long by 10 in. the R Value is 6. Is there anything wrong with the duct work I'm using.( to big, to small, wrong R Value, or does it matter.) North Carolina. Thanks
I have a 2 ton heat pump,will 10 inch duct work be to big or small or does it matter. Thanks Jinglehimer.
View more questions Search
|
