Check out some similar questions!
45692-001 blower control board will not turn blower on in either heat or cooling mode
[ 2 Answers ]
Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...
AC Blower will not turn off
[ 0 Answers ]
I have a Trane Model 7WE042C14FB1, the blower was working fine, but was not pushing enough air, I removed the blower in order to clean it, when I installed the blower back, the blower will not shut off. It only turns off when I flip the fuse in the main breaker panel. Can someone point me in the...
Heat blower does not turn - Air Handler does not turn on for heat
[ 7 Answers ]
I have an Energy Kinetics System 2000 boiler. It is hooked up to two different zones (two different air handlers). Zone 1 (main house) when turned on at the thermostat clicks and calls for heat, the boiler starts for a bit but the fan/blower never kicks on. Zone 2 (master bedroom) works just...
Blower will not turn off
[ 1 Answers ]
Trying to install a new Blower into a 20+ year old Weather King furnace, the blower will not turn off after all wires are connected, and thermostat is set, the thermostat is as old as the furnace and does not have an auto switch, it is just a dial thermostat. What can we do or what are we doing... View more questions Search
Add your answer here.
|