Ask Experts Questions for FREE Help !
Ask
    veedogg40's Avatar
    veedogg40 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2010, 12:56 AM
    I need to wire a lennox g12 conservator unit, wires from thermostat to transformer
    The unit is a 1988 or 89 lennox g12 conservator unit and its wired incorectly I need to know how to wire from the tsat to the transformer. Also I don't see a circuit board.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 25, 2010, 02:46 AM
    Quote Originally Posted by veedogg40 View Post
    The unit is a 1988 or 89 lennox g12 conservator unit and its wired incorectly i need to know how to wire from the tsat to the transformer. also i dont see a circuit board.
    http://0190acd.netsolhost.com/manuals/G12R_Series.pdf

    OR plain G

    http://0190acd.netsolhost.com/manuals/G12.pdf

    One or the other will work for your wiring diagram. This is all you need to figure it out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox G12 - Replacing Gas Valve [ 1 Answers ]

10/25/09 I have an old Lennox G12RQ3-82 furnace with a Robertshaw 7000 gas valve. Can I Switch out this standing pilot unit with an intermittent pilot model, say a White Rogers 36E gas valve? I want to upgrade the system so that I'm not burning a pilot light 24-7 all winter. Any...

Lennox G12 conversion from NG to LP [ 2 Answers ]

I am trying to figure out which orifices I need to buy in order to convert my furnace from NG to LP. The model number is G12RD2E-55-6. Are there some pressure springs I also need?

Lennox G12 furnace [ 3 Answers ]

Hello, My daughter has an old Lennox G12 furnace and the pilot light went out. I know this should be a simple task to relight, but we are not sure where the pilot light is and don't want to just stick a live flame in to "search" for it. Thanks, Chele

Lennox G12 AC Runs Constantly and Thermostat Won't Control [ 10 Answers ]

Hey guys, I have a Lennox G12 that was installed when the house was built back in 1990. I recently had the AC stop working altogether. I then found the control transformer to be bad. I went to Home Depot and bought a multi use transformer that the electrical guy said "should" work. After...

Lennox G12 Furnace won't ignite [ 1 Answers ]

Hello, I have problems with my Furnace. I currently have a Lennox G12RD2-82-3 from 1980. Last week I replaced the furnace blower but now the furnace won't ignite. These are the conditions: --the pilot is always on -- I have replaced the thermocouple --the thermostat is OK --the blower kicks on...

View more questions Search