Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a Saddle Valve
[ 3 Answers ]
I Have a saddle valve that allows water flow to a furnace humidifier. I can not shut it off nor turn the valve stem. Can a saddle valve be replaced or does one install a new piece of copper pipe and then install the valve?
Replacing shower valve
[ 6 Answers ]
Remodeling our bathroom and need to switch out the shower valve. The walls are open, so everything is accessible. If it's harder than this, or I'm missing something, please let me know... All outside the wall... 1 - disassemble the guts of the valve so as to not damage it with heat 2 -...
Replacing Lennox 18K201 control unit with 31M73
[ 3 Answers ]
I am replacing my old burnt 18k201 circuit board with the new 31m73 on my Lennox air handler and have run into a problem with the wiring. The exiting wiring harness is a 14 pin P2 connector and the new one has a 10 pin J85. Is there an adapter available to mate the 2 or at least some intructions on...
Replacing Shut off valve on PVC
[ 6 Answers ]
My water line going to the dishwasher was leaking so I replaced it. Now I've figured out that the shut off valve is leaking at the nut that goes over top of the PVC pipe. I bought a replacement valve but can't figure out how to get the old one off the PVC pipe. I'm assuming it has glue/cement...
Replacing Gas Oven Valve
[ 2 Answers ]
I recently had an employee from the local gas company in my kitchen and he looked at the shut off valve for my gas oven. He suggested I call a plumber and change the valve because it was very old and prone to failing. What are the best types of gas shut off valves that I should ask a plumber to... View more questions Search
|