 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Wizard Quatium XTE 1/c 6 hp lawnmower. I can't find where the throttle screw is. If anyone knows how, please, greatly appreciated.
Hello all, I would like to replace my parents LuxPro DM2110 standard heat/cool thermostat with a Honeywell T8602D (which is a programmable unit) to help save money. They have a older Rheem 10 SEER heat pump, model RPKA 049JAZ. I have found the manual for the honeywell unit at: ...
My 2003 explorer just started overheating well at least the temp gauge says that. It doesn't blow hot air either. I do not know what's wrong I. Replaced the thermostat and that didn't work. It will run fine then out of the blue it will go to overheating but when I stop and check everything it...
OK I have looked everywhere and crossed reference as many charts as I can but I still can not seem to find a definite wiring diagram for this. My old Luxpro wiring goes like this and it makes sense. RED WIRE connected to R GREEN WIRE connected to G ORANGE WIRE connected to O WHITE WIRE...
I currently have two Honeywell CT-87 Round Thermostats, one for heat and one for A/C. They are located right next to one another. I would like to replace the two thermostats with a digital programmable. Need help with the wiring. Heat is 3 wire and A/C is also 3 wire. Need help connecting to new...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
