Ask Experts Questions for FREE Help !
Ask
    dryheat2010's Avatar
    dryheat2010 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2010, 07:40 PM
    Reset the fan blower weather maker 8000?-
    Outside unit kicks on- generates cool air-ok, good. Inside handler does not kick on, motor dead? Can I reset it, thermosat is fine...
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jul 22, 2010, 08:00 PM

    Wondering,if the inside handler doesn`t kick on,how do you know the unit is generating cool air?

    Never seen a reset on blower motor, set the tstat to fan/fan on,does blower work then? Let us know
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weather maker 8000 furnace [ 5 Answers ]

I changed the ignitor and the thermostat on my weather maker 8000, the fan runs good but there is no flame coming out at all, neither the ignitor will turn red. What else should I check?

Weather maker 8000 [ 2 Answers ]

If you install a weather maker 8000 upsidedown will it affect anything, or is it happy under any application?

Carrier weather maker 8000 [ 5 Answers ]

Model # 58TUA06008 has had the main board replaced but it keeps shuting off and then will restart after four hours or if I shut the power off and turn it back on. Is this an issue with the heat sensors or something else. I known the main board has been recalled is there any other issues. Thanks G

Carrier weather maker 8000 [ 1 Answers ]

What's the cost of a Carrier weather maker 8000 ignitor and how can I purchase it? Thank You

Weather maker 8000 R-W [ 1 Answers ]

We have a weather maker 8000. And we have gotten a code 12 from the L.E.D light. The code means R-W closed. My question is what is the R-W and where is it located on the Weather Maker 8000?:confused:

View more questions Search