Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter Thermostat wiring
[ 6 Answers ]
Hello! I seem to have "developed" a problem tonight. I just removed my old manual thermo and labeled the wiring accordingly. It looked the heat hot came into a spot labeled "4". Then it was jumpered to Rc. So when I hooked up the Hunter programmable 44360, there was already a jumper between Rc and...
Hunter fan wiring
[ 4 Answers ]
We have a Hunter ceiling fan with four side lights and one central dome light. The pull switch on the light fixture had to be replaced. We know the wiring for the four side lights, but not for the central light. The central light has four wires: two white and two black which somehow connect to...
Hunter fan wiring model 26107 light fixture wiring sequence
[ 2 Answers ]
There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?
Hunter 44260 Wiring
[ 3 Answers ]
Replacing Thermostat from a iNVENSYS 9420 to the Hunter 44260. I have 7 wires coming from the wall. Tan, Red, Orange, Green, Blue, White, Yellow The old had L,C,R (Tan to C, Red to R) Y2, Y1,E,W2,G,O,B (Yellow to Y1, Orange to O, Green to G, Blue to B, and White to W2) The New Hunter has G,...
Missing B and O wires for connectint to a Hunter 40170 thermostat
[ 2 Answers ]
I am replacing a white rodgers thermostat with a Hunter 40170. The wires have all been marked but the old thermostat does not have wire connections for the B and O terminals. These are for heat and cooling reversing valves. Where do I go from here. Will it work without wires in these terminals? I... View more questions Search
|