Ask Experts Questions for FREE Help !
Ask
    cld361's Avatar
    cld361 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2010, 10:37 AM
    Ac will run
    The AC did not turn on this year. Even when you turn the fan mode to on, the fan does not come on. We had a high efficiency Goodman furnace installed in December 2008 and it has a control board which I am not used to having. Is it possible the fuse went out on the furnace and that is what is causing the problems?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 21, 2010, 10:42 AM

    Do you have a Humidistat?
    Does anything work?
    Is their anything on the display?
    Are Breakers on?
    cld361's Avatar
    cld361 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 25, 2010, 05:52 PM
    The breakers inside and outside are on. The fan set to "on" does not work and neither does the AC. I found the manual after I sent this and realized it has display control that will provide some answers for the heat. Not sure if it will help with the air conditioning. Since it is an outside entrance, I have had the opportunity to go down and see how to get to the display.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jul 25, 2010, 06:31 PM

    Does your Auto work, and is anything in the Display?
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #5

    Jul 25, 2010, 07:42 PM

    Check for a fuse or any LED lights on the PC board
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't get weedeater to run will run for few seconds and cut off Please help! [ 0 Answers ]

Weedeater will run for few seconds then cut off have new gas,fuekl lines, primer bulb, and spark plug please help!

Wiring a ceiling fan in middle of run, outlet at end of run [ 5 Answers ]

I am wiring a bedroom ceiling fan and just needed someone to help me figure out part of the wiring I'm not sure about. The goal is to have a 2 gang switch control the light and the fan separately. The switch is at the beginning of the run, then the ceiling fan, and then I also have an "always...

New Compressor Run OK. HVAC Fan only run in Heat mode. [ 15 Answers ]

This board is awesome. I have done some reading first on here. Here's my case: Compr runs fine. Fan on HVAC blower inside runs only in Heat mode. Not on Cool. Not even on "FAN-ON" as opposed to FAN-AUTO. Can this be an issue with relay and board within HVAC? Per other thread, it was talking...

View more questions Search