Ask Experts Questions for FREE Help !
Ask
    Plumbingresponse42's Avatar
    Plumbingresponse42 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2006, 07:10 AM
    I am also having a very hard time getting started on this sight and it seems that others may be too, as observed by old dates with no responses. I was trying to share a solution to question from Turben. The washing machine may be siphoning off the water, due to taping at end of hose, causing a vacuum/siphoning effect : I had this problem and got that solution from a maintenance friend.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 17, 2006, 08:08 AM
    "I am also having a very hard time getting started on this sight and it seems that others may be too, as observed by old dates with no responses."

    Go back and read #3 in Toms Tips and then please bring to my attention the posts that you claim were ignored on the plumbing page.
    Since the only post you have made on this site is this one ,( and that one is a complaint) let me know what it is you wish to respond to and we will help you. You say" The washing machine may be siphoning off the water, due to taping at end of hose, causing a vacuum/siphoning effect."

    What water? From the washer tub? The trap? Explain taping the hose? To the stand pipe? To a overhead connection? And what was the solution the maintenance man gave you? Please enlighten us as to how we can improve this site and if you have complaints about the plumbing page I'm the right guy to make them too. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water In Washing Machine [ 3 Answers ]

i'm not getting hot water to my washing machine, but everywhere in the rest of the house its fine. What do i need to do?:confused:

No water in washing machine [ 3 Answers ]

Washing machine was working an no water comes in. Anyone explain this?

No water to washing machine [ 1 Answers ]

When we try to run our Smeg washing machine we get an error message that there is no water supply. However, the pipes are all clear and the water is flowing (and the filters are clean). We were told that the circuit board needed replacing. Is there not just some way I could re-set the machine? ...

No water in washing machine! [ 2 Answers ]

Hi My washing machine was working fine, its Simpson Esprit 700, heavy duty. But from last 2 days it can't get any water from hose when I turn it on.I hear the motor is running and there is water on the tap and the hose is not clogged.For some reason the machine is unable to get water inside. Any...

Washing machine water troubles [ 4 Answers ]

Hi just a question to see if anyone could help as to my problem with my washer. The last few days when running washer (cold water only) the water seems to take a very long time to fill. When the switch if flipped to warm/cold or any other combo. The water comes out fine. Just on cold cold does...

View more questions Search