Ask Experts Questions for FREE Help !
Ask
    darthsim16's Avatar
    darthsim16 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2006, 05:00 PM
    Oil leak
    I have an oil leak somewhere in my 93 civic ex and I was wondering what I could do about it. A mechanic friend said it looks like its coming from the "oil sending unit"? I think. And that some kind of gasket or seal in that needs to be replaced. Please help.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 16, 2006, 05:42 PM
    Should be very easy to fix. Just replace the oil pressure switch with a new one, which is located right above the oil filter. Apply liquid gasket, Honda Part No. 08718-0001, to the threads when installing and torque to 13 lb-ft.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Dec 16, 2006, 08:50 PM
    darthsim16, I'm virtually 100% certain, if your mechanic friend is any good. Just remember, leaks that sometimes appear down low start from above. If you ensure your valve covers are not leaking, the oil pressure switch is likely the source of the leak. It's a common problem.

    If you really want to make sure this is the source of the leak, clean the area around the oil pressure switch with engine cleaner and observe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 dodge ram 1500 oil leak [ 1 Answers ]

My dodge ram v6 is leaking oil from the shaft tha comes out of the water pump. There is no oil in the water. Is there a seal that can be raplaced by removing only the fan or is this going to be a total nightmare??

Commercial oil-based v.s artist's oil paint [ 1 Answers ]

I am painting on interior brick, already painted with oil-base commercial and wish to use commercial oil-base paint because I think it is more durable than artist's paints, i.e. dusted, perhaps even washed. Is there something I can use to thicken it, thus allowing it to work more like artist's...

Too much oil? [ 1 Answers ]

Hi All! I don't know what I would do without this site :) I am having difficulty starting my lawnmower and have a feeling I may have put too much oil in when filling the crankcase. Now the mower won't start and I am seeing a liquid seeping out of the air filter thing. Someone said I may have...

View more questions Search