Ask Experts Questions for FREE Help !
Ask
    zoomie's Avatar
    zoomie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2007, 02:15 PM
    Honeywell CT3200 for Fireplace
    I've replaced the CT3200 that came with the house with a newer thermostate.

    Now the simple spring thermostat from the gas fireplace just quit. Can I use the 3200 to simply turn the fireplace on and of at a given time? There is only a black and white wire coming out of the wall and W Y G and R choices on the 3200.

    Thanks in advance.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Feb 4, 2007, 02:19 PM
    Should work to connect the 2 wires to the R and W.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fireplace [ 1 Answers ]

Hi,this is whisky4 asking about the highest safe temputure for a fireplace,the fireplace I have is fairly thick as it sticks outside of house plus what is inside the house,the house was built in 1924had a chimney sweep look at it and he sid it was all right,thank,s

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

Fireplace [ 1 Answers ]

I have an existing fireplace (insert) w/ a brick chimney. It is fairly old, but in decent shape except for the back wall of the insert itself. It appears to be nothing more than concrete or mortar of some type over top of the back metal wall of the fireplace. It is cracked and has several plugs...

Gas Fireplace [ 5 Answers ]

Hi, I just bought a ventless propane gas log set. I, however, only have natural gas in my household. Is there a way I can convert the propane set to natural gas? Thank you

Fireplace [ 1 Answers ]

I bought my townhouse, new in 1991 direct from the builder. The fireplace came with the townhouse and is now 12 years old. Here is my problem, In the front left & right corners of the bottom of the fireplace where the floor of the fireplace and metal frame come together there is a gap of about...

View more questions Search