Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Crumbling Basement Stone Walls?
[ 2 Answers ]
My house is over 90 years old, and I am getting quite worried with the condition of the basement stone walls. I can literally rub my hand on the mortar, and it crumbles away. I am having the same problem with my brick chimney, only the section in the basement. The bricks themselves are slowly...
Re-grouting shower floor
[ 8 Answers ]
I am doing some re-grouting work on my shower floor. The tiles are about 2 inches wide and the spaces between the tiles are about 1/8 inch or a bit less. Do I use sanded or unsanded grout?
Grouting 3/8" stone mosaics
[ 1 Answers ]
An installer is having a tough time grouting 12x12" sheets of 3/8 x 3/8" stone mosaics because the chips are adhered to the mesh with very tight joints. I have explained that he must use unsanded grout, but feel that there must surely be some more useful information I can give him! He says it's...
Natural stone veneer
[ 4 Answers ]
I'm planning to build a split face granite stone wall around my garage. Can anyone give me the ratio (shovels of sand, cement and/or mortar) to add for the mix. It's been years since I laid up a stone wall and don't remember it for sure. Also, any tips on cracking a stone, such as how to read the...
Re grouting shower floor
[ 1 Answers ]
I'm in the process of re grouting a shower floor. I've removed loose grout with a grout saw and ready to apply new grout. Question - Most of the grout is still in good shape and very little was removed (mostly only edge spots). Along the edge is mold. I've attempted to use cleaners to remove... View more questions Search
|