Ask Experts Questions for FREE Help !
Ask
    sabutterfly's Avatar
    sabutterfly Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 13, 2010, 07:50 AM
    Dryer pigtail from 4 to 3 to match the receptacle
    How do Change the 4 wire pigtail on the dryer to a 3 wire to match the receptacle in a mobile home? What do I do with the green wire on my dryer?
    applianceman's Avatar
    applianceman Posts: 30, Reputation: 2
    Junior Member
     
    #2

    Jul 13, 2010, 10:09 AM
    There is usually a metal tab running from the center connector (neutral) on the terminal block to part of the metal casing. You can attach it there. Sometimes there is a hole outside of the terminal block cover that will have an arrow and say ground - attach it there. If either of these don't work for you attach it to the dryer body with a sheet metal screw.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

To pigtail or not to pigtail -- wiring double gang box [ 4 Answers ]

I would like to wire a double gang box with two pair of receptacles on the same circuit and not switched. Technique 1: One source told me it is preferable to pigtail hots, neutrals, and grounds to each receptacle in the box so that a possible future receptacle replacement might be easier. ...

How do you attach a pigtail to your dryer [ 2 Answers ]

I have to a dryer that the plug does not fit the outlet and was told to attach a pigtail, the only prob is how do I do that?

Pigtail from 2 switches to receptacle? [ 4 Answers ]

I opened up an electrical box to find a wire hitting the floor. I have one outlet on the left hand side which contains a switch for a light and switch for a fan. It works fine. It has one black wire on one side and two yellow wires on The other side. The right side had an old receptacle that was...

Wiring a 4 wire pigtail to a whirpool dryer 3 connector [ 1 Answers ]

Have a whirpool Senseon dryer that only has 3 connectors and the ground wire is currently screwed to the frame. My new house requires a 4 wire pigtail/plug. Do you just ground the 4th green wire to the frame? Is this acceptable wiring for this 4 wire pigtail?

Mix match plug and receptacle [ 5 Answers ]

Can I wire a 20 amp, 3 pole, 4 wire grounding locking plug to a 50 amp 2 pole 3 wire receptacle? I would like to use a portable generator in a remote area.


View more questions Search