Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore Dryer not heating -wire connector discoloration
[ 8 Answers ]
Hi, I have a Kenmore Dryer not heating but spins and appears to be working fine. I've visually check the heating element and don't see any breakage on the coil. I do see wire connector discoloration on the two thermostat , (hi-limit tstat and operating tstat). I'm planning on replacing both. Do...
Dryer wiring 3 prong -- neutral wire?
[ 10 Answers ]
Hi-- I am trying to wire what seems to be a 3-prong dryer into a 4-prong dryer receptacle. If I understand correctly, I need to disconnect the ground from the neutral on the back of the dryer, and hook them up separately to my 4-wire cord -- the ground wire is the added 4th wire. However,...
240V Wire Color/Connector mapping
[ 1 Answers ]
In a 240V circuit, the red and black are the 2 hot wires. When connecting these 2 wires to a receptacle or plug, does it matter which wire go to which of the 2 hot prongs? I have a Hubbel NEMA 14-30P... the 2 hot prongs is label XXX & YYY. Does the Red go to XXX and Black go to YYY? Does it... View more questions Search
|