Ask Experts Questions for FREE Help !
Ask
    sky857's Avatar
    sky857 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 10, 2010, 12:24 PM
    Why won't my john deere l130 blades engage
    When pulling the PTO switch on the john deere l130 mower the blades won't engage
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Jul 10, 2010, 01:32 PM

    Check and make sure the clutch is still plugged in .check for power going to the plug.
    Check your belt make sure its still on the pulley.
    With key on not running pull on switch and see if you hear a click.
    If so clutch is working ,check for belt trouble.
    Luck
    leorbutter's Avatar
    leorbutter Posts: 1, Reputation: 1
    New Member
     
    #3

    Apr 1, 2012, 01:19 PM
    I pulled the swith with the key on and aI did not hear a click
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Apr 1, 2012, 03:04 PM
    Hi,
    Chec the wire going to the clutch, have seen breaks in them.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L130 deck won't engage [ 5 Answers ]

I have a John Deere L130 lawn tractor and when I pull the PTO switch to engage the deck the mower tries to die and won't engage the deck. Could it be that the PTO switch is faulty and needs to be replaced or is it something else that's wrong ?

John deere l130 mower [ 2 Answers ]

The fuse blows when I engage the mower deck New battery new fuse new switch I don't know

John deere 455 - blows fuse when I engage the blades - any ideas? [ 4 Answers ]

The 455 - with a 22hp diesel engine. The fuse blew and the mower would not start. Replaced fuse - now it starts but when I engage the blades the mower dies and fuse is blown again. Any suggestions?

John Deere L130 [ 3 Answers ]

Subject: John Deere L130 Mower Is there a way to adjust the drive belt on this mower? Not the mowing deck belt but the drive belt. Thanks in advance for any help. Jimmy

John Deere L130 [ 1 Answers ]

Concerning my 3yr. Old John Deere riding mower L130 w/23HP Kohler engine. The pedals that you depress to make it go forward and backwards seem to have lots of slack or looseness in them. My neighbor has the same machine and his has no looseness and respomds to foot movement quickly. Can this be...


View more questions Search