Ask Experts Questions for FREE Help !
Ask
    richwin's Avatar
    richwin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 1, 2010, 01:37 PM
    John deere l130 mower
    The fuse blows when I engage the mower deck
    New battery new fuse new switch I don't know
    lwb1376's Avatar
    lwb1376 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 8, 2010, 07:47 PM
    Iam also looking for the answer to this question,blows fuse within minutes of cutting grass.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    Jul 8, 2010, 08:43 PM

    Sounds like you have a bad pto clutch.test it for a dead short.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L130 deck won't engage [ 5 Answers ]

I have a John Deere L130 lawn tractor and when I pull the PTO switch to engage the deck the mower tries to die and won't engage the deck. Could it be that the PTO switch is faulty and needs to be replaced or is it something else that's wrong ?

John Deere L130 riding mower won't stay running [ 7 Answers ]

We only have about 30 hours on this 1.5 year old garden tractor, as it only really needs to be used about once a year when the wild grasses are very tall and they're getting quite brown and becoming a fire hazard. Thus, it had been sitting unused for a few months when I tried to start it to move...

John deere L130 lawn tractor won't turn right [ 1 Answers ]

When you turn the steering wheel to the right it just makes a clicking noise and won't turn

John Deere L130 [ 3 Answers ]

Subject: John Deere L130 Mower Is there a way to adjust the drive belt on this mower? Not the mowing deck belt but the drive belt. Thanks in advance for any help. Jimmy

John Deere L130 [ 1 Answers ]

Concerning my 3yr. Old John Deere riding mower L130 w/23HP Kohler engine. The pedals that you depress to make it go forward and backwards seem to have lots of slack or looseness in them. My neighbor has the same machine and his has no looseness and respomds to foot movement quickly. Can this be...

View more questions Search