Check out some similar questions!
Trying to install a Honeywell rth3100c thermostat but the wiring diagram does not mat
[ 0 Answers ]
installing a Honeywell rth3100c thermostat however the wiring diagram does not match what is currently in place on the old mercury switch model my current connections w2-white y-yellow-g-green e-black r-red b-blue x-orange and terminal L and O are empty
Wiring honeywell th3210d thermostat to goodman mbr1200aa-1 modular blower
[ 7 Answers ]
Need a wiring diagram to connect a honeywell th3210d thermostat to goodman mbr1200aa-1 modular blower with 20kw heater coil
How do I install a new Honeywell RTH230B from Honeywell T8195B
[ 1 Answers ]
Good evening. Our old thermostat was model T8195B which came with wires C,Y,W,R & G. has no rererence as to where they hook up. The new one RTH230B doesn't say where these wires go. I've removed the Rc/Rh jumper according the instruction manual. Nothing went on at all. What can I go Thank...
Wiring for Honeywell TH5220D1003, set on cool, but blows heat.
[ 2 Answers ]
I have a 2 1/2 ton Goodman self contained heat pump with a heat strip which was set up with a Janitrol HPT 18-60 thermostat. I replaced that with a Honeywell TH5220D1003 thermostat. The Janitrol was wired: Y= yellow G= green ...
Install Honeywell RTH230B, Removing Honeywell Q674L
[ 2 Answers ]
I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up... View more questions Search
Add your answer here.
|