 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
trying to install a Honeywell rth3100c thermostat but the wiring diagram does not mat
installing a Honeywell rth3100c thermostat however the wiring diagram does not match what is currently in place on the old mercury switch model
my current connections w2-white y-yellow-g-green e-black r-red b-blue x-orange and terminal L and O are empty |
||||
Check out some similar questions!
I replaced my old mechanical thermostat with a Honeywell RTH3100C digital. My heatpump is an older Rheem. My wires are RED,YELLOW,GREEN, WHITE AND WHITE1. I connected the red,green,yellow to their respective terminals. I don't know what to do with the White1. The blower comes on and with the White...
Hello everyone. If you have an answer or even a suggestion, to my problem please let me know. I have been going crazy trying to figure this out. I am replacing a bad Honeywell (T8411r) thermostat. The LED lights went out and I could no longer see to adjust the temp. The HVAC unit worked...
I have a trane heat pump in my home. I am attempting to install a Honeywell TH3210D1004 in place of the current trane weathertron one that is currently installed. My question is where do the white and tan wires go. I have found homes for the rest of them. There are two slots left "aux" and "l"....
What is the wiring layout from the Janitrol hpt 18-60 to the Honeywell RTH230B?
I have a Weathertron Thermostat Model # baystat239 and try to convert to Honeywell RTH3100c. Connecting to weathertron thermostat currently are x2-black o-orange g-green y-yellow t-brown r-red w-white
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
