 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I was helping a friend replace outlets in his old house. The original outlets have two wires and no ground. They are mounted in a metal box. We installed the new 3 pronge outlets and used grounding pigtails to ground them to the metal box. We turned the power back on after completion and none...
What is the difference between neutral and separate grounding?? Why and when do you defer between them?? Basically why do we ground, what's its purpose and what are the differences between the varying methods. I hope I don't sound dumb but the US NAVY nuclear electrical school didn't teach me ...
Is there anyway that sombody tell what is the length for ground rods for trailers ,someone told it should be like 8 feet long ,but I find it difficuilt to get that length of the ground rod under the ground ,is there any other way,another person told me that I can connect three shorter grounding...
TK - Stan - Wash - KISS, For the purpose of discussion: :) A subpanel located in the same residence as the main panel uses the main panel's Ground system. Separate Grounding rods and EGC are not needed for the subpanel For a remote building, a sub panel must have its own independent...
I am in the process of installing a brick patio in the back. While digging out the area I ran into two rods with the grounding wire from the house attatched. The tips of the rods were sticking out of the ground slightly covered by mulch. I don't want to move the rods or the patio. My question is,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
