[reallyperplexed]

The White Rogers has 8 wires and the Hunter 44360 has only 6 places for wires. Should all 8 wires be attached to the Hunter or which ones do I not connect?

[hvac1000]

White rodgers model number?

[reallyperplexed]

I can't find a model #, but 153-7758 is inside the drop down door. Where would I find the model number?

[wmproop]

Why?

[reallyperplexed]

The only other numbers that I can find are on the inside of the cover of the White Rogers,
Type no. 1F82-51
17 to 30 volts max
50/60 HZ. 1.5 AMPS MAX
Class 2
156-2305 is stamped along the edge

[hvac1000]

Here is your old thermostats wiring diagram. Transpose the wiring from the old to the new using the diagram.

http://www.emersonclimate.com/Docume...-5650rev_A.pdf

[reallyperplexed]

Thank you. My problem is still the two extra wires that are on the White Rogers. There are 8 wires for the existing White Rogers and only 6 places on the new Hunter 44360. Where should the other two wires be attached on the Hunter 44360?

[hvac1000]

Thank you. My problem is still the two extra wires that are on the White Rogers. There are 8 wires for the existing White Rogers and only 6 places on the new Hunter 44360. Where should the other two wires be attached on the Hunter 44360?

That is why I posted the old stats manual. I believe you might have the wrong kind of thermostat. Your old stat is a two stage heat unit. Is your new stat for 2 stage heat pump use?

[wmproop]

That is why I posted the old stats manual. I believe you might have the wrong kind of thermostat. Your old stat is a two stage heat unit. Is your new stat for 2 stage heat pump use?

The brand name tell me that you have the wrong tstat,, get yourself a good honeywell or a white rogers, for a 2H/1C system

[reallyperplexed]

Thank you for your help. It appears that I'll need to get a different type thermostat to replace this White Rogers that has no battery backup. Thank you, again.