 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Nothing, not even a click, right? 12.89 amps or DC Volts? Are you testing between the battery terminals? Try testing by grounding one lead and put the other lead on the power feed to the ignition switch, still get power? Now try moving that lead from the feed to the terminal feeding out to the starter, turn the key, still get power? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Murray 12.5 40" mower that won't turn over. Jumped on it this spring and it turned over maybe 1 1/2 times then went dead. It first sounded like a bad battery so that was replaced. I then replaced the following items: Starter, solenoid and ignition switch. Still nothing. I turn the...
My lawn mower won't start when I turn on the key
My lawn tractor died in use and will not restart. There is spark, there is gas in the tank the spark plug wire is attached, the engine cranks strong but doesn't start. I tried shooting starting fluid in the carb - no luck. Yesterday it started and went 50 feet, died again and won't start again. ...
Hi All, First question on this forum, thanks in advance for any help. I have a Yard Machines by MTD rider with (I believe) a 14.5 horse B&S engine. Used over the winter with the snow plow attachment and worked fine until one time when I went to use it and turned the key but sounded like the...
I was mowing today when my Toro wheel horse rider model 70040 (electric start) began to slow down. I was driving along in 4th gear, and I noticed it was going pretty slow, it felt more like 2nd. I stopped, backed up, thinking there may have been something under me slowing me down, and it reversed...
View more questions Search
|
