Ask Experts Questions for FREE Help !
Ask
    schatt's Avatar
    schatt Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 26, 2010, 06:07 AM
    Y only problem is that the blade speed is not responding. It's moving somewhere betwe
    Hampton Bay Redington III Fan UPC Code: 792145330493
    As you probably know, this fan is remote control operated. My remote operated the lights and the fan blades in both directions. My only problem is that the blade speed is not responding. It's moving somewhere between slow and medium. Since the wireless receiver is picking up the signal what can I do to correct this?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 26, 2010, 07:31 PM

    Does this fan have pullchains?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    schatt's Avatar
    schatt Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 28, 2010, 05:24 AM

    Sadly, no pull chains. That would have been too easy.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jun 28, 2010, 07:51 PM

    Sounds like you will have to replace the receiver. Unless the receiver has only 5 wires, in which case there would also be a capacitor inside the fan that needs to be replaced.

    http://www.ceiling-fans-n-more.com/c...capacitors.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Jacobsen Imperial 26 snow blower stops moving forward in any speed. [ 2 Answers ]

Last winter I noticed my Jacobsen Imperial 26 snow blower would stop moving forward occasionally. If I put it reverse and backed up a bit and then put it in a forward gear it would go for a time and then do it again. Over the summer I cleaned the rubber band and the disk that drives it. I ran it on...

What are the tools for compressing files and folder and what are the difference betwe [ 1 Answers ]

I need to know what are the different tools used for compression of files / folers etc and what are the major differences between them

Light bulb size for a multi-speed four light five blade Casablanca Fan [ 2 Answers ]

I had a Casablanca ceiling fan (5 blades/4 lights) installed in the late 1970s or 1980s. It's still going great, but I am uncertain whether it can take more than 40 watt light bulbs. I would like to generate more light and am wondering if I can install 60 watt light bulbs in this fixture? Does...

Craftsman mower stopped moving but blade engagement still works and mower starts [ 7 Answers ]

Can someone help me determine why my craftsman kohler engine 16hp manuel transmission riding lawnmower stopped being able to move but still is able to turn on/off and engage the mower blade? I have checked the clutch but it appears to work since the mower is able to be turned on/off. All of the...

Speed and angle needed to meet moving object [ 2 Answers ]

A football is thrown toward a receiver with and initial speed of 20 m/s, at an angle of 30 degrees above the horizontal. At the instant, the receiver is 20 meters from the quarterback. In what direction and with what constant speed should the receiver run in order to catch the football at the level...

View more questions Search