 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Distributor
I have a 98 gmc yukon with a 5.7 350. Upon doing work on my vehicle I lost the original screws that fit the distributor cap to the distributor and replaced with some others that fit. The other screws actually bored through the distributor holes and now the cap just sits losely on the distributor. I have another ditsributor but have a few questions. How do you know if a distributor has been modified or not? If anything, what can I do to make it work for me? I know that there is a kind of sensor or whatever it's called screwed to the distributor, can this just be changed out. Any info is greatly appreciated. Thanks
|
||||
Check out some similar questions!
Okay my distributor bolts are loose so I can put it back in time because I got a different head for my car. So when I turn the car over to start it the distributor like tries to come out an gets all tight an I can't move it. I looked at the head but my shaft is not bent? Its not the distributor......
Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda civic
I need to remove my igniter so do need to remove my distrubetor from 1988 honda civic lx, and do I have to realing the timing. Thank you
OK I have a 94 prelude I just put a 91 accord motor in but I used the prelude wiring harness (h23 dohc) so it's the samething as a 92 accord harness . The 91 has a internal coil and 92 has external and that's what I need but I was told that I could use the 91 but I would have to leave the coil...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
