Ask Experts Questions for FREE Help !
Ask
    nolluk's Avatar
    nolluk Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2010, 01:16 PM
    Have a Lawnflite 705 AutoDrive, 13AP508E611.
    Have a Lawnflite 705 AutoDrive, 13AP508E611.
    Just finished cutting grass, went for a drink came back now the mower will not move forward or in reverse.
    All belts are fine and turning.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 25, 2010, 06:23 PM

    Sounds like your disk brake is stuck.
    nolluk's Avatar
    nolluk Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 28, 2010, 11:35 PM

    Thanks for reply. Sheared spline on axle rod in the differential. Trying to source another, without having to buy the whole gearbox.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawnflite belt repairs [ 1 Answers ]

Lawnflite 705LA I need to replace a drive belt on my mower, only way I can see to get it on to pulley is to disconnect pulley from engine. How do I stop pulley turning hen I try toundo nut also is it left or righthand thread?

Mtd lawnflite drive [ 7 Answers ]

I have a 11hp briggs and stratton powered mtd lawnflite. There is a problem with the drive to the wheels. It was progressive over last summer (where I lost drive to 5th gear, then 4th etc etc)and now I need to mower the grass it will not move when I put it into gear. Any ideas? Kind regards...

Yardking 22hp autodrive [ 2 Answers ]

I have a yardking auto drive and it is very slow in forward

Hampton Bay Ceiling fan - part 705 RME-02 [ 5 Answers ]

I have a issue with the wiring in my ceiling fan and Home Depot told me to order Hampton Bay Ceiling fan - part 705 RME-02 from Hampton Bay. I can not find this part online.

M.T.D. Lawnflite [ 1 Answers ]

I have a MTD lawnflite ride on mower, with a briggs 16 1/2 HP engine, 40 inch cut. The axle/gearbox does not engage drive as normal, but when put in to gear clonks and judders violently. I have replaced stub axle bearings as I know these can cause the chain wheel to snatch, the trouble is in the...

View more questions Search