Ask Experts Questions for FREE Help !
Ask
    daisya1's Avatar
    daisya1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2010, 12:01 PM
    John Deere 455 mower blades not turning
    When I engage the PTO the light on the dash lights but blades not turning. Engine running fine - not cutting out or anything.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 16, 2010, 07:41 PM

    Check you pto solenoid its on the rear plate on the transaxle,check for power at plug,if so replace it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere 455 mower. Blades go on and off as mower is running. Why? [ 2 Answers ]

I have a 455 John deere mower. When I pull the pto switch the blades engage. But as I keep mowing the blades kick off and on. Put new pto switch in. put new battery on. Voltage from alternator is good. Could it be the pto solenoid? If not then what?

John deere 318 blows fuse when blades are on [ 1 Answers ]

I have a john deere 318 when I engage the blades and run it fore 10min the battery light comes on and blows a 29amp fuse,, help

John deere 455 - blows fuse when I engage the blades - any ideas? [ 4 Answers ]

The 455 - with a 22hp diesel engine. The fuse blew and the mower would not start. Replaced fuse - now it starts but when I engage the blades the mower dies and fuse is blown again. Any suggestions?

John Deere 318 Lawn tractor ,Mower Blades won't kick in to mow [ 3 Answers ]

:DI have a John Deere 318 been working on for a couple years finally got it going but will not engage the mower blades It used to run good and then it would just shut the blades off. I would let it cool off and start again and it would run the blades for awhile then quit. Now it won't kick in at...

View more questions Search