Ask Experts Questions for FREE Help !
Ask
    pepelandin's Avatar
    pepelandin Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 12, 2010, 01:20 PM
    When I turn the hot water in the bathroom sink, it starts banging only at full blast
    The problem is only in the bathroom hot water, if I turn it on at full blast, it starts banging, if I close it to less than half, the banging stops.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jun 12, 2010, 02:32 PM

    What's the brand name of your faucet? One handle or two knobs?
    How old is it? Back to you, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water in hot or cold bathroom sink after flushing my gas hot water heater [ 5 Answers ]

Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...

How do I shut off the hot water to change the hot water valve of my bathroom sink ? [ 4 Answers ]

Hi there ! The hot water valve to the sink leaks a bit and I want to change it before I start painting. I know I have to close the main valve but what do I do with the hot water tank ? Do I shut it off or empty it and if so how I do I go about filling it again ? :confused: Thanks to whoever...

Banging noise when hot water baseboard turn on [ 11 Answers ]

My hot water baseboard system was bleeded two weeks ago when the water flowing noise was heard. Now, every time when heat turn on, there are several big bang noise from the pipes on my second floor. Please tell me what is going on and what I should do? I last week, I changed new expansion...


View more questions Search