Ask Experts Questions for FREE Help !
Ask
    rudyloz's Avatar
    rudyloz Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2010, 10:24 PM
    Do the #4 gound wire for a 200 amp service panel need to be shield
    My question is if the ground wire #4 from a new 200 amp service panel to the entrance of the main water line needs to shield
    rudyloz's Avatar
    rudyloz Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 10, 2010, 10:27 PM
    Do the #4 gound wire for a 200 amp service panel need to be shield
    Do I need to run #4 ground wire shield or bare wire from the service box to the cold water .
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    Jun 11, 2010, 02:34 AM
    Either is fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Updating service panel to 200 amp with feeder to 100 amp panel in old house [ 8 Answers ]

I currently in the process of converting 1000 sq ft of attached garage into living space while doing this we are updating electrical service to 200 amp new service, there is 100 amp service in the old part of the house which will remain but need to be sub paneled from the new 200 amp service. I...

Adding another panel from a 200 amp service panel [ 3 Answers ]

Hi everyone, this is my first post. I have a 60 x 100 ft shop that has a 200 amp service fed in from the pole. Well I added a living space in the shop, which is about 720 sq ft. I plan on doing all the wiring myself and need a little advice on what kind of panel I should use? The living quarters...

200 amp service panel [ 2 Answers ]

How many single pole breakers can I put in my 200amp panel?the bottom of my panel has split bus fin on the last couple spots are they:confused: for double pole only? Thank :confused:

Extending 200 amp service to another 200 amp panel [ 1 Answers ]

Hello Everyone, As I just found this site this is my first time posting. I am in the process of doing an addition to my home and I am having the electrical service moved as the addition is on an exterior wall. I installed a new 200 amp panel and I need to extend the electrical over to my...

200 AMP Service panel to 200Amp Sub Panel [ 1 Answers ]

I getting new 200Amp service to surface mount service panel. I want to run 2oo cable to bring it sub panel in my Garage which is approx 120Ft Run through ceiling. 2 Questions 1. Is there any ristriction on running a 200AMP inside house to garage ? 2. I got a dirt cheap subpanel that has...

View more questions Search