Ask Experts Questions for FREE Help !
Ask
    ekibaloe's Avatar
    ekibaloe Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2010, 01:08 AM
    220 vAC to 110 vDC converter
    I have 220 vac which I want to convert to 110 vdc.

    What's needed?
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Jun 10, 2010, 03:47 AM

    You will need a step-down transformer and rectifier at the least. If you need nice smooth DC you will need a filtering network of capacitors and maybe even a regulator. Depending on the requirements there may be some design time involved.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert 220 VAC 1Phase to 2-110VAC circuits [ 6 Answers ]

I have a 220VAC single phase 30 amp circuit that I would like to split into two 110VAC circuits. The 220VAC circuit has 3 wires and if I measure across the two main terminals I get the 220VAC and if I measure between a main terminal and what appears to be ground, I get the 110VAC. If I take one of...

Thhn - nec ratings vac or vdc? [ 7 Answers ]

I need somebody to show me proof that the national electrical code amperage ratings of thhn copper wire are based on 120 vac please.

220 vac 4 wire to 3 prong receptacle [ 4 Answers ]

Where do the 4 220vac wires go in the 3 prong receptacle? This is for a range...

220 vac 100 amp service [ 8 Answers ]

What size of copper wire and conduit should I use for a 150' run to a sub panel?

View more questions Search