Ask Experts Questions for FREE Help !
Ask
    pasterm's Avatar
    pasterm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2010, 04:10 PM
    Wood deck between uneven areas
    I have a 6 foot dirt area between my concrete pool deck and a second slab of cement. I would like to build a wood deck to concrete the two slabs of cement. The only problem is that the second slab is lower than the first.how can I connect the two uneven slabs with the deck
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 1, 2010, 05:07 PM

    How much lower? 7" to 10" lower would be ideal for a single step.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do build a deck over uneven concreate patio. [ 4 Answers ]

Hi, I'm trying to find information on how to build a deck over and uneven concreate surface, I have minimal height from the concreate to the door of the house approx 20cm there for am unable to use bearers and joists plus decking surface, are there any tips out there. I would be greatfull for any...

Uneven wood joint cut [ 2 Answers ]

I finally removed a rotten piece of trim wood. I had a hard time because of a metal Drip cap extended partial over the trim board. I used a reciprocal saw. It made An uneven cut, for the piece that was left on the house. I liked to even it off in Some way. Possibly by sanding, maybe wood...

Uneven skintone in some areas [ 1 Answers ]

My skin is over all a good complexion but some areas there are like uneven coloring how do I get rid of them? Is there anyway to remove darker areas?

Wood deck over broken, uneven concrete patio [ 2 Answers ]

I have a broken and uneven concrete patio - I don't want to remove it - I want to cover it with a wood deck... it is fairly stable - can I just put in small posts and level it and use it as a base for the new patio ?

Deck cutting uneven [ 1 Answers ]

Mower is mowing uneven. Left blade is cutting about half an inch to three fourths of an inch lower than the right side on a lt1000 craftman mower. How does one adjust the blace height or the mower deck to make both sides cut at the same height?

View more questions Search