Ask Experts Questions for FREE Help !
Ask
    timwuest69's Avatar
    timwuest69 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 31, 2010, 07:45 AM
    Robertshaw room thermostat 9500
    Need to no wireing diagram and how to use the thermostat
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    May 31, 2010, 04:25 PM
    http://www.icca.invensys.com/manuals...w/110-734B.pdf


    Not knowing what you are wiring it to it is impossible to help you,, maybe this web site can help
    ChrisDo789's Avatar
    ChrisDo789 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 4, 2012, 07:19 PM
    I have the same thermostat robershaw 9500 and perhaps I can help if you provide more info.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

RobertShaw 9420 Thermostat [ 8 Answers ]

My thermostat keep shutting off altogether. No reading or anything. After a day of so, it will click back on by itself. Usually when I've had the controls in the off position rather than cool or heat. Once it comes back to life I can turn the ac on but it normally goes out again within a few...

Robertshaw thermostat 9420 [ 0 Answers ]

I set my temperature to 74 F last night. When I got up the temperature had automatically turned to 45 F. The air conditioner was running all night. This morning I set it back to 74 F, the temperature again went back to 45 F in a minute. I also tried to reset the thermostat. It did not work. What...

New robertshaw 9610 thermostat [ 0 Answers ]

Looking to see if someone could help me wire a new robertshaw 9610 thermostat my old round one shorted out and this is the one I was given by the guy who fixes stuff where I work I have 3 wires that come up from the breaker panel and 3 wires that go down to my electric heat in my living room but I...

Wiring a Robertshaw 3210 Thermostat [ 1 Answers ]

Hello, My old tstat, a ritetemp 8029, was connected as follows: Label-->connectors RC-->RC RC-->RH (jumpered) Y-->Y W-->W G-->G

View more questions Search