Ask Experts Questions for FREE Help !
Ask
    drewlarson's Avatar
    drewlarson Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2008, 10:28 AM
    Wiring a Robertshaw 3210 Thermostat
    Hello,

    My old tstat, a ritetemp 8029, was connected as follows:
    Label-->connectors
    RC-->RC
    RC-->RH (jumpered)
    Y-->Y
    W-->W
    G-->G

    On my new Robertshaw 3210, I have the following connectors:
    R
    C
    L
    O
    B
    W2
    E/W1
    Y1
    G

    Can you help me with which wires go to which connectors?

    Thank you,

    Drew
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 29, 2008, 10:34 PM

    The Robertshaw 3210 I believe is a heatpump tstat. You paid more $$ for something you don`t need.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

RobertShaw 9420 Thermostat [ 8 Answers ]

My thermostat keep shutting off altogether. No reading or anything. After a day of so, it will click back on by itself. Usually when I've had the controls in the off position rather than cool or heat. Once it comes back to life I can turn the ac on but it normally goes out again within a few...

Wiring from Janitrol hpt 18-60 to Robertshaw 9420 [ 1 Answers ]

I have 5 wires going to the Janitrol thermostat as follows: Y = yellow G = green R = red O = white E = blue C = nothing E jumpered to W2 with copper wire Can someone help me with which wires go where on the new Robertshaw 9420 Thermostat? Does anything need to be jumpered? My heat pump...

Wiring a robertshaw 9610 themostat [ 1 Answers ]

I have five wires red,white,yellow,blue and green where do I wire them to the Robershaw 9610 model themostat?

Wiring from robertshaw to honeywell [ 1 Answers ]

Hi! I have central electric heating and a heating pump for heating and cooling I just bought a programmable thermostat (honeywell rth7000) to replace my existing robertshaw. But I have few questions - on my robertshaw I have terminal 24v and 24v(c) I assume that is the samething as R and...

View more questions Search