Craftman gas blower not firing,where ignition-module

milk1 Posts: 2, Reputation: 1

New Member

May 29, 2010, 08:49 PM

Craftman gas blower not firing,where ignition-module

Craftman gas /leafblower not firing,new plug,clean carbon depoist from piston, cylinder bore still not cranking, any ideas?

Check out some similar questions!

No power to ignition module or PCM ignition fuse, any thoughts [ 1 Answers ]

It's a 2001, Pontiac, Grand am, v-6 3.4. with the key in the on position there is no power to the ign mod, f/p inj, and pcm ing. so naturally its no start. I'm not sure of the circuit , the wire diagram is a little help, any suggestions? Frustrated

Ignition Module test [ 2 Answers ]

Hi guys Furnace : whisperheat with ignition box close and open The furnace carries ignition model and spark sensor pilot. On G/V you can see mp mp/mv mv which are all connected to the igniton module and grnd connected to the furnace . Now the problem : When you call for heat ,the...

To check intermittemt ignition module [ 1 Answers ]

Hi guys How would you check out the intermittent ignition module to make sure it is not faulty . Thanks for any answer

Changing out ignition module [ 4 Answers ]

I'm in the process of changing out a G60RBG-3 for an S8610U Universal Intermittent Pilot Module. What is the correct location for the wires? Make: Bryant Model: 585JJ030075 Gas furnace.

Ignition module replacement [ 1 Answers ]

How do you locate and replace ignition module in my chevy 1994 pickup 1500 350

View more questions Search

Check out some similar questions!

Add your answer here.