Ask Experts Questions for FREE Help !
Ask
    rma127's Avatar
    rma127 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 25, 2010, 06:21 AM
    Older single handle delta with separate diverter on spout. Looking for diagrams
    House was built by ushome in 1995, has older style shower with separate diverter on spout. I believe this is the ball and valve. I took off the cap and stainless sleeve but am unsure how to dis-assemble from there. Any diagrams would be helpful. Thanks.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 25, 2010, 11:25 AM

    Just replace the spout with a new spout with diverter.
    rma127's Avatar
    rma127 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 25, 2010, 01:04 PM
    Quote Originally Posted by hkstroud View Post
    Just replace the spout with a new spout with diverter.
    Hi. Thanks for the response. I may not have asked the question properly. Sorry. My faucet leaks and I need to fix, so I wanted to know if there is a diagram that can guide me through this model, I believe it is a 1300 or 1400 delta model.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    May 25, 2010, 01:22 PM

    See this post by maximillion6 about 4 post down. What is shown is a Price Pfister tub and shower valve but things should be basically the same.

    https://www.askmehelpdesk.com/plumbi...ks-473265.html
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    May 26, 2010, 06:32 AM
    Would this be your valve,(see image) ? Let me know, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a single handle Delta tub faucet w/o a shower. Diverter engaged.. Disengage? [ 2 Answers ]

I have a single handle Delta tub faucet w/o a shower. The faucet diverter for the non-existent shower has become engaged, the ring at the spout exit. With the pressure diverted to the non-existent shower, how do I get the pressure back to the spout? I've tried messing with the ring but to no...

Delta single handle hot water adjustment [ 2 Answers ]

I have a Delta Single Handle Shower faucet and I can't seem to get enough hot water out of it. As you turn the faucet counterclockwise, it should get hotter. However, it actually starts hot and then gets cooler as the handle is turned CW. Over the years, it has worked OK since about a 1/4 turn...

Delta 1400 Series Single handle shower [ 9 Answers ]

I recently replaced the cartridge on my Delta 1400 series monitor single-handle faucet, and everything seem to have gone in to place OK, I did have some trouble removing the handle and the clamp brass ring initially as it had not been moved since installation (2002), but now when I turn on the...

Delta single handle shower removal [ 2 Answers ]

I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a...

Dripping Delta Single-handle kitchen faucet [ 2 Answers ]

I have a single-handle Delta kitchen faucet that will not stop dripping. I did some research online and learned to buy a replacement kit to replace the interior workings of the faucet. I have done that, and have replaced every interior part, both O-rings, the springs and seals (which I am told is...

View more questions Search