Ask Experts Questions for FREE Help !
Ask
    macvan's Avatar
    macvan Posts: 1, Reputation: 1
    New Member
     
    #1

    May 21, 2010, 05:00 AM
    Connecting power generator to incoming mains
    I have to install a 100kva generator at an office block. He incoming mains goes through a 150A 3PH isolator. I have 2 150A 3PHcontactors that I need to use as the ATS, which will be installed next to the DB Board and isolator. There are also 3 surge arrestors in the DB board.Where do I interuppt the incoming power before or afer the isolator
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    May 23, 2010, 06:01 AM
    I will assume an "isolator" is nothing more than a disconnect switch of some sort.

    The ATS needs to be downstream of the disconnect.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting Generator to Generator Transformer. [ 0 Answers ]

For connecting 7 MW generator to generator transformer, which is better cable or NSPB ?

I require for a Power Plus 5000 Generator 1 generator under following specifications: [ 1 Answers ]

I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio

How is a generator connected to mains electric [ 4 Answers ]

What switch gear is required? And instructions please. I have the ability to work with wiring safely.


View more questions Search