Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical Engineering (https://www.askmehelpdesk.com/forumdisplay.php?f=497)
-   -   Connecting power generator to incoming mains (https://www.askmehelpdesk.com/showthread.php?t=472190)

  • May 21, 2010, 05:00 AM
    macvan
    Connecting power generator to incoming mains
    I have to install a 100kva generator at an office block. He incoming mains goes through a 150A 3PH isolator. I have 2 150A 3PHcontactors that I need to use as the ATS, which will be installed next to the DB Board and isolator. There are also 3 surge arrestors in the DB board.Where do I interuppt the incoming power before or afer the isolator
  • May 23, 2010, 06:01 AM
    tkrussell
    I will assume an "isolator" is nothing more than a disconnect switch of some sort.

    The ATS needs to be downstream of the disconnect.

  • All times are GMT -7. The time now is 01:45 PM.