Ask Experts Questions for FREE Help !
Ask
    JwAls's Avatar
    JwAls Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 17, 2010, 12:29 PM
    Kenmore Furnace
    .
    Monday - 17-May-'10 -
    .
    Furnaces - New Propane Forced Air - "High" Efficiency - Brands - Choosing one:
    .
    I have quotes for Kenmore (ICP/Carrier ?), Goodman, Century, & Carrier.
    .
    Any suggestions based on RELIABILITY, ease of maintenance, parts availability, performance, etc.?
    .
    The prices vary somewhat - Goodman being the least expensive.
    .
    I am looking at propane - "2-stage" - 95% efficiency - some with two heat exchangers - no air conditioning needed (northern lower Michigan location).
    .
    Helpful experience and suggestions are needed.
    .
    Thanks.
    .
    JwA
    .
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    May 17, 2010, 02:23 PM

    Never buy goodman! If these are your choices I would go with carrier, but it all depends on how good the installer is, and the warranty you are going to get.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore furnace 70 power miser [ 0 Answers ]

The kenmore power miser 70 furnace. The ignitor comes on then turns off with the burners never getting lit, it keeps doing this then the blower motor comes on.

Kenmore Furnace has pressure switch alarm going off [ 0 Answers ]

My furnace is blowing cold air. The fan is blowing but the gas is not being exchanged through the furnace and pushing it out for hot air. The alarm light on the funace is saying the pressure switch is closed? Any suggestions?

Kenmore 90 Furnace goes into lockout [ 2 Answers ]

My furnace is a Sears Kenmore 90 (Propane) The info on the placard inside the cabinet is: MFG.: HQCD (I believe it to be a TempStar) Model: NULK125DK03867 Mfr. No.:NULK125DK03 The problem: Thermostat calls for heat The ID fan starts and I've inspected the vent and there is air being blown...

Kenmore furnace moisture [ 6 Answers ]

I have a kenmore furnace that will not light because of moisture from the a/c beingg used during the summer. Every year, the first time I need the heat, I have to call a service guy and $100 later, it will work although it seems to take awhile to ignite for the whole season until I use the a/c again

Hange blower speed in kenmore furnace [ 1 Answers ]

Hange blower speed in kenmore furnace

View more questions Search